This is a 40 & 28 PIN PIC Development Board
The PIC 40 / 28 PIN (DIP) Development / Evaluations board demonstrates
the capabilities of Microchip’s 8-bit microcontrollers, specifically,
28- and 40-pin PIC16FXXX, PIC16F1XXX, and PIC18 devices. It can be used
as a standalone demonstration board with a programmed part. With this
board you can develop and prototype with all Microchip's 40 & 28 PIN PIC
microcontrollers which doesn’t require crystals (External Oscillator).
On board connector for UART (RX-TX) allows an easy connection with
embedded hardware. The board has a Reset switch and status LEDs.
On board 3.3 V and 5V DC converter allows using 3V and 5V PICS, This
board support both 3.3V low power and normal 5V operation. All I/O Pins
out with female header and male header connectors.
- Power Supply 7V to 36V DC @ 3 Amps
- 40 PIN PIC18F46K22 & 28PIN
PIC18F26K22 DIP Micro-Controllers
- The PIC development platform is
exclusively designed to offer full experimenting flexibility to a
developer or application engineer for the enhanced range of 28/40 pin 8
bit PIC Microcontroller.
- Industrial standard 3A Switching
regulator brings in safe operation of the board for all type of input
supply without overheating.
- Dual supply (5.0V and 3.3V @ 3A) takes
care of all the supply needs of your IO devices and operating voltage of
the board. Independent Supply of 3.3V, 5V and Input VDD (Input Supply)
is always available at header pins.
- With a single Jumper you can
select the operating voltage of the MCU between 5.0 and 3.3 V
PICKIT2 standard ICSP interface available for ease of programming.
Separate IO pins for the UART interfacing available for Serial
- A LED circuit on every IO pin of the MICRO to give
you an easy visual status of the pins. Optional and not provided along
with the kit.
- Separate PWR ON indicator for each of the 2 supply
(3.3V / 5V) available.
- Dual Header connector , Male/Female
available for ease of interfacing with the outside world
switch to reset the onboard MCU.
- Supply reverse input diode for
protection at both 3.3V and 5V DC-DC Converter inputs
Download Schematic in
Download PCBs in PDF